6.7 Powerstroke Turbo Upgrades: 2017–2019 Drop-In Turbo Guide

The 2017–2019 6.7L Power Stroke left the factory with one of the better variable geometry turbos Ford has fitted to a Super Duty. It is also the first thing to run out of air once a 6.7 Powerstroke gets tuning, more fuel or a heavy trailer behind it. This guide covers what the factory turbo is, where it runs out, how to tell which turbo your truck actually has, and what a drop-in upgrade changes.

Quick answer: For a 2017–2019 6.7 Powerstroke that tows, daily drives and runs a tune, a drop-in VGT upgrade is the most practical turbo change. The True North Turbos 63.5/62 drop-in pairs a 63.5mm (2.50") 6+6 compressor with a 10-blade mixed-flow turbine and is rated to 650 HP with factory emissions equipment in place, or up to 750 HP in off-road competition builds, both with tuning.


Which 6.7 Powerstroke Turbo Does Your Truck Have?

Ford has used four different factory turbos on the 6.7L. Drop-in turbos are built around one of them, so confirm your model year and body style before shopping.

Model years Factory turbo What matters for an upgrade
2011–2014 Garrett GT32 SST, dual-sided compressor wheel, ball bearing, wastegated Different turbo, pedestal and plumbing. Usually retrofitted to the later GT37 style first.
2015–2016 Garrett GT37 VGT, single compressor wheel, journal bearing, no wastegate Same family as 2017–2019, but an earlier pedestal. The TNT 63.5/62 does not fit these trucks.
2017–2019 Garrett GT37 VGT, updated for the 2017 Super Duty The platform the TNT 63.5/62 drop-in is built for.
2020 and later Revised Garrett VGT with an electronic actuator Different turbo and controls. Not interchangeable with 2017–2019 parts.

Pickup or cab and chassis? Ford fitted a different factory turbo to 2017–2019 cab and chassis trucks than to pickups, so stock replacement turbos are not interchangeable between them. The TNT 63.5/62 is built to fit both: 2017–2019 F-250, F-350, F-450 and F-550, pickup or cab and chassis.

For the full year-by-year breakdown, see What Turbo Is on a 2017–2019 6.7 Powerstroke?


The Factory 2017–2019 Turbo and Where It Runs Out

When Ford moved the 6.7 to the GT37 for 2015, it dropped the troublesome dual-sided GT32 compressor and the wastegate in favour of a single 61mm (2.40") inducer compressor wheel, a larger turbine wheel and a journal bearing cartridge. Variable vanes in the turbine housing do the job the wastegate used to, and they also make the factory exhaust brake work.

On a 2017–2019 truck that turbo supports 440 HP and 925 lb-ft (2017) or 450 HP and 935 lb-ft (2018–2019) from the factory. It has some headroom for tuning, but as fuelling goes up it ends up spinning harder to make the same boost. That shows up as:

  • Exhaust gas temperatures climbing faster on long grades with a trailer
  • Power that flattens out near the top of the rev range
  • More drive pressure and more heat through the turbo and the valley

More detail in 6.7 Powerstroke Turbo Power Limits.


The TNT 63.5/62 Drop-In Turbo

The True North Turbos 63.5/62 is built as a direct replacement for the factory 2017–2019 turbo on F-250, F-350, F-450 and F-550 pickups and cab and chassis trucks. It keeps the factory footprint, variable geometry and factory exhaust brake function while moving more air on both sides.

Spec Factory GT37 (2017–2019) TNT 63.5/62 Drop-In
Compressor inducer 61mm (2.40") 63.5mm (2.50")
Compressor design Single-sided wheel 6+6 (six full blades, six splitters), 89mm (3.50") exducer
Turbine wheel Factory VGT turbine 72/66 x 62mm, 10-blade mixed flow
Turbine control Variable geometry Variable geometry
Exhaust brake Factory Retained
Power rating 440–450 HP stock 650 HP with factory emissions equipment; up to 750 HP in off-road competition builds (with tuning)

Why a mixed-flow turbine?

A mixed-flow turbine wheel takes exhaust in at an angle rather than purely radially. That lets it recover energy more efficiently in transient conditions: pulling away loaded, climbing a grade, getting back into boost after a shift. For a heavy truck that is most of its working life. Turbine blade count is a common question on this platform, and it is covered in 9 Blade vs 10 Blade Turbos on the 6.7 Powerstroke.

Why a 6+6 compressor?

Fewer full blades at the inducer means less blockage and more flow through the 63.5mm (2.50") inlet, while the splitter blades keep pressure ratio and efficiency up through the exducer. The wheel is sized for the 650 to 750 HP range rather than being a stock-sized wheel pushed past its efficient range.

See the 63.5/62 drop-in turbo or browse the TNT Powerstroke drop-in turbo collection.


Drop-In VGT vs Fixed Geometry Conversion

There are two routes to more turbo on a 6.7 Powerstroke, and they suit different trucks.

Drop-in VGT Fixed geometry (S300 / S400) conversion
Installation Factory location and plumbing Kit or fabrication; new pedestal, piping and drain
Exhaust brake Factory VGT control and exhaust brake retained Factory exhaust brake function is lost
Spool and towing manners Close to factory Depends on sizing; usually laggier
Factory emissions equipment Can remain in place Not compatible
Best for Towing, daily driving, tuned street trucks Dedicated performance and competition trucks

The trade-offs are covered in VGT vs Non-VGT Turbo for the 6.7 Powerstroke. If a big single is the plan, start with S300 Turbo for Power Stroke or S400 Turbo for Power Stroke.


Supporting Modifications

A bigger turbo adds airflow. It does not add fuel, tuning or cooling, and the gains depend on all four working together.

  • Tuning matched to the turbo — needed to reach the rated power and to control boost and vane position properly
  • Fuel supply — a lift pump or supply upgrade before adding significant fuel
  • Intake and charge piping — a free-flowing intake and upgraded intercooler piping
  • Transmission tuning — the 6R140 benefits from shift and line pressure changes once torque goes up
  • EGT and boost monitoring — so you can see what the truck is doing on a long pull

Full list in 6.7 Powerstroke Supporting Mods for Towing & Power.


Factory Turbo Problems to Know About

The 2015–2019 GT37 is far more durable than the original GT32, but it is still a variable geometry turbo living in a hot engine valley. Soot and heat can make the vanes stick, which shows up as underboost or overboost codes, surging, or an exhaust brake that stops working properly. Symptoms, common codes and fixes are covered in 6.7 Powerstroke VGT Turbo Problems.


6.7 Powerstroke Turbo Guides

Not sure which turbo fits your truck? Send your build details through the Turbo Spec Form.


Frequently Asked Questions

What is the best turbo upgrade for a 2017–2019 6.7 Powerstroke?

For a truck that tows and daily drives, a drop-in VGT upgrade sized a step above the factory turbo is the most practical choice. The TNT 63.5/62 is built for this: 650 HP with factory emissions equipment in place, up to 750 HP in off-road competition builds, both with tuning.

What turbo comes on a 2017–2019 6.7 Powerstroke?

A Garrett GT37 family variable geometry turbo with a single 61mm (2.40") inducer compressor wheel, a journal bearing cartridge and no wastegate. Cab and chassis trucks use a different version from pickups. The TNT 63.5/62 fits both.

Will a 2017–2019 drop-in turbo fit a 2015–2016 6.7 Powerstroke?

No. The 2015–2016 trucks use an earlier version of the GT37 with a different pedestal. The TNT 63.5/62 is built for 2017–2019 trucks only.

Does the TNT 63.5/62 keep the exhaust brake?

Yes. It keeps factory variable geometry control, so the factory exhaust brake continues to work.

Do I need tuning with a drop-in turbo?

Yes. Tuning is required to reach the rated power figures and is strongly recommended for boost control, vane control, drivability and long-term reliability.

Will an upgraded turbo lower EGTs?

A turbo that moves more air at the same boost generally lowers exhaust gas temperatures on a tuned truck, especially on long pulls under load. Fuelling and tuning still decide where EGTs end up.

Can I keep my factory emissions equipment?

Yes. The 63.5/62 is rated to 650 HP with the factory emissions equipment in place.

Power ratings on this page are quoted in crank horsepower (HP). Figures previously published in wheel horsepower (WHP) have been restated using our in-house tested conversion — the hardware and its capability are unchanged.